Stack-Cap Pedestals

Our new Hybrid Pedestal™ System consists of 7 standard components and off-the-shelf, 4.215” diameter SDR-35 PVC pipe. The PVC pipe allows the pedestal system to vary in height up to 22+ inches and is cut to the desired height using 12” chop saw. The Uni-Base is then “press fit” on to one end of the PVC pipe and a Uni-Collar on to the other end and requires no gluing or other attachments. Either 3/4” or 1-1/2” Uni-Insert is then screwed in to the Uni-Collar allowing for fine height adjustments. The assembly is completed by aligning and locking the Uni-Cap with the Uni-Insert. The Uni-Cap features include built-in self-leveling and removable 1/8” spacer tabs for proper paver spacing and joint alignment.

Stackable caps

allow for minor height adjustments from 1/2” up to 6” and can compensate for slopes of 0% to 3% by aligning the built-in slope compensator of one cap relative to another. Simple, easy and affordable!

Single model design

allows for all height applications from low as 1/2” and as high as 22” resulting in reduced labor and material cost. Eliminates leftover parts and pieces!

PVC pipe adjustment

allows the pedestal system to vary in heights up to 22+ inches by using off-the-shelf 4”ø SDR-35 PVC pipe available everywhere. Eliminates material & shipping cost!

Screw adjustment

allows for quick and easy fine height tuning for an additional 3/4” or 1-1/2” depending on model size of UNI-INSERT™ used.Eliminates having to cut pipe exactly!

Self-Leveling

head allows for slope compensation of 0% to 6% in any direction. Allen or Hex key will allow for leveling while loaded with pavers. Eliminates having to remove pavers to make adjustments!